Jinfa-Cummins series is positioned to its value of:
Leading adaptability in the industrial area
Reliability&Lifetime low cost operation and maintenance
Globally technical & service support
Genset Standard Configuration
Assembled by Cummins diesel engine and world famous brand
alternator
Radiator and fan with safety guard
Automatic control panel and electricity output switch cabinet
Float battery charger and solenoids switch as standard supply
scope
Strong and durable hi-strength base frame
Cummins Engine
The new design of the electronic speed regulation system of Cummins
diesel engine has the following features:
4 valves per cylinder, spring separately. Water; exhaust gas
turbo, four stroke, the inlet water for cold air type, direct fuel
injection systems.
PT fuel injection system with advanced EFC electronic governor,
diesel engine steady adjustable rate can be set between 0 to 5%
(constant speed), which can realize remote operation controland
easy to realize automatic control, torque synchronous excitation
system can make the engine quickly recover rotation speed under
sudden load increase.
The electric heater in engine intake manifold allows
quick/reliable engine start under low temperature and can reduce
greenhouse gas emissions. Achieve the emission standards prescribed
by the state government.
The combustion process was optimized by using advanced
technology, significantly reduce the fuel consumption, no overhaul
time more than 15000 hours,industry-leading level;lower fuel
consumption,the use oflower cost, higher efficiency and security.
Better starting performance at low temperature.
Alternator(Stamford, Leroy Somer, Mecc Alte, Marathon, etc)
Alternator adopts brushless synchronization alternator of world
famous brand, based on a variety of operating voltage requirements,
optimizing winding design and eliminating effectively the third
harmonic voltage, which together with the superior performance of
automatic voltage regulator and PMG(optional), in with superior
performance in generating non-linear loads.
Form: single/double bearing
Protection: IP23(IP44 optional)
Balance: rotator balance is in accordance with ISO1940 and
NFC51-112 standard
Over speed: 2250rpm
Insulation Class: H
Mechanical structure: steel base frame
| JC SERIES(50Hz), 380-440V, 20-1500kVA |
| Genset Model | Standby Power | Prime Power | Engine Model | Dimension | Weight |
| kVA | kW | kVA | kW | mm | Kg |
| JC*20-1 | 22 | 18 | 20 | 16 | 4B3.9-G2 | 1950x735x1420 | 765 |
| JC*25-1 | 28 | 22 | 25 | 20 | 4B3.9-G2 | 1950x735x1420 | 765 |
| JC*30-1 | 33 | 26 | 30 | 24 | 4BT3.9-G2 | 2080x735x1420 | 760 |
| JC*40-1 | 44 | 35 | 40 | 32 | 4BT3.9-G2 | 2080x760x1450 | 760 |
| JC*55-1 | 61 | 48 | 55 | 44 | 4BTA3.9-G2 | 2180x805x1450 | 824 |
| JC*75-1 | 88 | 70 | 80 | 64 | 4BTA3.9-G11 | 2180x805x1450 | 830 |
| JC*100-1 | 110 | 88 | 100 | 80 | 6BT5.9-G2 | 2475x800x1470 | 1185 |
| JC*112-1 | 124 | 99 | 112.5 | 90 | 6BTA5.9-G2 | 2620x800x1495 | 1280 |
| JC*135-1 | 149 | 119 | 135 | 108 | 6BTAA5.9-G2 | 2620x800x1495 | 1295 |
| JC*150-1 | 165 | 132 | 150 | 120 | 6BTAA5.9-G12 | 2620x800x1495 | 1300 |
| JC*180-1 | 198 | 158 | 180 | 144 | 6CTA8.3-G2 | 2680x855x1560 | 1600 |
| JC*200-1 | 220 | 176 | 200 | 160 | 6CTAA8.3-G2 | 2790x1045x1640 | 1700 |
| JC*250-1 | 275 | 220 | 250 | 200 | 6LTAA8.9-G3 | 2890x1045x1780 | 1900 |
| JC*250-1 | 275 | 220 | 250 | 200 | MTA11-G2 | 3425x1250x1915 | 2750 |
| JC*325-1 | 358 | 286 | 325 | 260 | NTA855-G1B | 3370x1060x1810 | 2900 |
| JC*350-1 | 385 | 308 | 350 | 280 | NTA855-G2A | 3370x1060x1810 | 2950 |
| JC*380-1 | 418 | 334 | 380 | 304 | NTAA855-G7 | 3550x1210x1955 | 2800 |
| JC*420-1 | 462 | 370 | NA | NA | NTAA855-G7A Standby | 3550x1210x1955 | 2900 |
| JC*450-1 | 495 | 396 | 450 | 360 | KTA19-G3 | 3700x1275x2100 | 4280 |
| JC*500-1 | 550 | 440 | 500 | 400 | KTA19-G3A | 3700x1275x2100 | 4250 |
| JC*550-1 | 605 | 484 | 550 | 440 | KTAA19-G5 | 3700x1735x2235 | 4550 |
| JC*575-1 | 633 | 506 | 575 | 460 | KTAA19-G6 | 4055x1550x2235 | 4550 |
| JC*600-1 | 660 | 528 | NA | NA | KTA19-G8 Standby | 3650x1685x2095 | 4550 |
| JC*625-1 | 688 | 550 | NA | NA | KTAA19-G6A Standby | 4055x1550x2235 | 4700 |
| JC*780-1 | 858 | 686 | 780 | 624 | KTA38-G2 | 4350x1750x2210 | 6600 |
| JC*810-1 | 891 | 713 | 810 | 648 | KTA38-G2B | 4350x1750x2210 | 6700 |
| JC*940-1 | 1034 | 827 | 940 | 752 | KTA38-G2A | 4350x1750x2210 | 6850 |
| JC*1000-1 | 1100 | 880 | 1000 | 800 | KTA38-G5 | 4300x2090x2210 | 7150 |
| JC*1150-1 | 1265 | 1012 | NA | NA | KTA38-G9 Standby | 4350x2090x2210 | 7210 |
| JC*1250-1 | 1375 | 1100 | 1250 | 1000 | KTA50-G3 | 4960x2070x2330 | 9140 |
| JC*1400-1 | 1650 | 1320 | 1400 | 1120 | KTA50-G8 | 5050x2260x2455 | 9400 |
| JC*1500-1 | 1650 | 1320 | 1500 | 1200 | KTA50-GS8 | 5250x2170x2540 | 9600 |
